Limited Time Offer!
Selling Price -
Selling Price -
2024 Land Pride RCB5715 Series RCBM5715
The RCB5715 is Land Pride’s new heavy-duty 15' double-deck rotary cutter designed to make right-of-way and roadside maintenance a simple and efficient task and comes with 4 patented features. The RCB57 also features greaseless pivot points, endcap grease zerks, easy-off shields, and a patented sliding guard over the splitter gearbox, making maintenance easy to perform. The RCB5715 model features rephasing cylinders on the wings.
- 2024
- Land Pride
- RCB5715 Series
- RCBM5715
- Rotary Cutters
- horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
- Gearbox: Gear Lube 80-90W EP
- 540 rpm or 1000 rpm / 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wings
- Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch. | Intermediate: Category 5 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.
- Number of: 6 - Wheel option: Four on transport axle and one on each wing axle. / 8 - Wheel option: Four on transport axle and two on each wing axle. | 21" (53.3 cm) or 26" (66 cm) Laminated tires. /24" (61 cm) Used aircraft, foam filled tires. / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic. / 29" (73.7 cm) Used aircraft tires.
- Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps) / At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)
- tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
- Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.
- Signal: LED / Seven pin connector: SAE J560 pin configuration
- Cutting capacity: 5" (13 cm) | LP Performance Hitch & BarTite hitch pivot shaft diameter: 2 1/4" (5.7 cm) | Lift hydraulics Center deck: 3 1/2" x 8" Re-phasing hydraulic cylinder with hoses, fittings & flip-over spacers / Right wing: 3 1/4" x 8" Re-phasing hydraulic cylinder with hoses & fittings / Left wing: 3" x 8" Re-phasing hydraulic cylinder with hoses & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3" x 12" hydraulic cylinders, hoses & fittings. | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm)
- 15'-0" (4.57 m)
- 16'-0" (4.88 m)
- with 21" tires: 10'-3" (3.12 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option
- 16'-3" (4.95 m) - With center deck raised fully up.
- 12" (30.5 cm)
- Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
- Gearbox: Splitter: 5.5 pints (2.6 L); Center deck & Wings: 12.4 pints (5.87 L)
- Wing transport protection: Wing Transport Lock Pin | Wing deck skid shoes: Each wing has one leading hardened beveled skid shoe and one trailing standard beveled skid shoe. Both are reversible and replaceable. | Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder options: Forged blade bar without the dish pan. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate. / Stacked blade shredder Kit without the dish pan. | Transport axle: Many configurations to choose from.
- Machine: 6860 lbs (3112 kg) | Tongue: 2,420 lbs (1098 kg) with wings down.
- thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
- Side skirt construction: Removable/replaceable 1/4" (6 mm) steel.
- Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.
- Yorkton, Saskatchewan
- New
- E003700
- 2024
- Land Pride
- RCB5715 Series RCBM5715
- Orange
- None
- Available
- Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.